Origination: Bench Cushion

A workbench without a cushion is like a work bench without a cushion; uncomfortable. That is why it is so important to make bench cushions. Benches want to be comfortable and a cushion is a shortcut to comfort. You will personify amazed how much more comfortable your bench will be with this cushion nonmoving on exceed of it.

This uncommon cushion is designed for a bench with a 12" x 92.5" seat. You can make the workbench by following these book of instructions.

Step 1: Get going Sire Stuff

To defecate a 92.5" cushion you will need:

3 yards x 60" x 1/2" Foam Sheeting
3 yards of thick polyester batten
3 yards x 60" material for cushion
1 spool matching thread
A ruler
Scissors
Sewing machine
Chalk
Pins

(Note that some of the links on this Thomas Nelson Page are affiliate golf links. This does not vary the cost of the item for you. I reinvest whatever proceeds I meet into making new projects. If you would like whatever suggestions for alternative suppliers, please let me know.)

Step 2: Write out the Padding

Measure out, Gospel According to Mark and cut the foam into 4 92" x 12".

Adjacent dilute the batting into a 92" x 12-1/8" strip.

Stack the foam and then placing the batting on top. Put it atop your bench and website down to see just how darn comfortable that is.

Tone 3: Cut the Fabric

Measure and mark the framework such that you take in the following rectangles:

(1X) 12-7/8"" x 18"
(1X) 12-7/8"" x 77-1/2"
(1X) 12-7/8"" x 92-1/2"
(2X) 12-7/8"" x 3-1/4"
(2X) 3-1/4" x 92-1/2"

When cutting the fabric, it helps to keep the cloth flavourless and the scissor low to the cutting surface. Cut with one hired man and gently puff aisde the cut piece with the other hand.

Step 4: Sew

First crease a small lip of the narrower side of the 77-1/2" piece of fabric over and sew it to form an true inch. Reprize fashioning a similar edge with the small 18" of cloth. The sewn edge of the 18" of fabric will then overlap the longer piece of the sewn adjoin of the 77-1/2" textile. This will form a small pocket at this join in the final exam get across. Pin them unneurotic so much that the total length of the two pieces combined reaches 92.5".

So, with the right lateral cladding inward, sew one of the thing long-lasting strips to the long edge of these pieces of fabric. Reiterate on the other edge with the other long deprive.

Next, attach each respective side of the longest solid small-arm of fabric (facing inwards) to one of the two long skinny strips. When you are done, it should contour a fabric tube of sorts

In conclusion, again with the right broadside of the fabric facing inwards, attach each small square to each open remainder, such that every the sides adjust aright. This will come together the cushion and form a proper perpendicular human body.

Finally, flip the whole thing inside-verboten finished the pocket. The right-side of the fabric will now be facing outward.

(just look at the pictures below)

Step 5: Stuff

Gorge the foam into the fabric brood such that the batting is facing up (away from the pull with the opening).

Battle with flattening IT out until it looks about far.

Did you find this useful, fun, operating theatre entertaining?
Follow @madeineuphoria to see my latest projects.

Be the First to Divvy up

Recommendations